EA POWER CONTROL

Remote control of multiple product series

EA Power Control software offers the following:

  • Separate remote control of up to 10 units at once, even if different types
  • Management of the most important device settings
  • Display of all actual values (U, I, P, R)
  • Input of set values (U, I, P, R) and alarm thresholds (OVP, OCP, OPP)
  • Remote control on/off setting, DC input/output on/off setting
  • Status (regulation mode, alarms, DC input/output condition)
  • Remotely control all features of the device with commands (SCPI or ModBus)
  • Sequencing & Logging (semi-automatic table control and data acquisition)
  • Master-auxiliary support for series with digital master-auxiliary bus (config, init, master shows system ranges)
  • Optional Multi Control (see below for details)
  • Complete remote control of the function generator or sequence generator of ELR 5000 (optional feature)
  • Visualization of actual and set values on a graphical plot area, with data save features as picture or CSV (optional feature)
  • Installer for .NET framework and USB driver
  • Demo mode (view all screens without an actual device connected) – 14-day test period (upon requesting a trial license)

With the optional add-on Multi Control you can:

  • Control and monitor up to 20 devices of any model from the supported series in one window
  • Build groups of any number of devices up to max 20 units in order to assign different values to the groups
  • Apply semi-automatic remote control (Sequencing) on any number up to max 20 units
  • Configure and use the function generator for any number up to max 20 units (the units must feature a built-in function generator)
  • Open and show the Graph for any number up to max 20 units, to visually compare recorded data
  • Record data (Logging) from any number of the max. 20 units
  • Automatically unlock the “Function Generator” app and the “Graph”.

Minimum requirements:

  • Windows 7 or newer
  • CPU 2GHz or better
  • 1GB RAM
  • Microsoft .NET Framework Version 4.5 or newer
  • Compatible device with USB or Ethernet port

Compatible with the following product series:

  • EL 3000 B
  • EL 9000 B / EL 9000 B HP / EL 9000 B 2Q
  • EL 9000 DT
  • EL 9000 T
  • ELR 5000
  • ELR 9000
  • PS 3000 C
  • PS 5000
  • PS 9000 1U / 2U / 3U
  • PS 9000 T
  • PSB 9000
  • PSE 9000
  • PSI 5000
  • PSI 9000 DT
  • PSI 9000 T
  • PSI 9000 2U – 24U
  • PSB 10000 4U (from Version 2.15)
  • PSI 10000
  • ELR 10000
  • PSBE 10000

Legal notice: the EA Power software can only be used with the devices listed above. Any change of the content, name or logo as well as commercial resale, rental or other use is not allowed. Please download and install at your own risk. The manufacturer is not liable for any damage that may result from use on a personal computer. This software is freeware and free of charge and does not claim to be complete, correct, accurate or error-free.